Installation
Settings
Ventilation
H
ow to set the ventilation
This list is for helping the installer get an overview of the settings, which has to be made in consultation
with the user or builder.
Function Settings
Setting the filter change period outdoor air Days:
Setting the filter change period extract air Days:
Which ventilation level is set for basic ventilation Level:
Is low ventilation at low outdoor temperature wanted Yes/No Level:
A
t °C:
Is low ventilation at low humidity wanted Yes/No Level:
Is high ventilation at high humidity wanted Yes/No Level:
Setting for maximum time high humidity Min:
What is the wanted room temperature °C:
Master sensor for room temperature T3 / TExt
Is high ventilation in cooling mode wanted Yes/No Level:
Is a cooker-hood connected to the ventilation system Yes/No Level:
Is the preheating-element activated (Polar version) Yes/No
Domestic hot water
H
ow to adjust the hot water settings
This list is for helping the installer get an overview of the settings, which have to be made in
consultation with the user or builder.
Function Settings
What is the desired hot water temperature °C:
Is supplementary electric heating to be connected Yes/No
At what temperature is supplementary electric heating to start °C:
Is frost-protection to be activated Yes/No
Maximum hot water temperature (for use during cooling) °C:
Is the unit to run automatic legionella prevention Yes/No
What day should legionella prevention run Weekly/Monthly Day:
What time of the day should legionella prevention run Time:
Compact P / Compact P Polar (English)
BY NILAN
3
To Next Page
General
