10
DTBU damper
Extension cable HMI user panel for 8-pin plug
Cover plate HMI user panel
Flexible sound damper
Pollen filter
If there is insufficient space for mounting an EM-box in the installation, you can achieve the same effect by
controlling the extract air with a DTBU damper.
You then have to adjust the duct system yourself with a connection to the cooker hood.
The control panel for the ventilation unit is connected to a short cable so that the panel can be mounted in the
immediate vicinity of the unit. The panel can also be mounted on the front of the unit.
Is the unit located in a place where you can not immediately see the control panel, e.g. in a closet or on a
unused ceiling, you can order a 10 or 20 m extension cable with plugs, so that the control panel can be placed
in a place where the user has the opportunity to see it.
It is important that the control panel is located so that the user can see any alarms such as when changing
filters i needed.
It is possible to move the HMI control panel away from the unit and place it in a more visible place.
A cover plate can be ordered to cover the hole where the control panel was located.
To make it esay to service the unit in the future, we recommend that you fit a flexible connection between
the unit and the duct system.
Nilan flexible sound damper absorbs sounds effectively from both the duct system and from roof stacks.
The ventilation unit comes, as standard, with a plate filter to protect the unit.
If the dwelling is used by anybody with, for instance, pollen allergies, you may benefit from purchasing a pol-
len filter. This should be placed in the outdoor air intake, which will reduce the pollen count in the dwelling.
To Next Page
Loading...
Need help?
General
