EasyManuals Logo

nilan CTS602 HMI Installation Instructions

nilan CTS602 HMI
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
General information
Introduction
General information prior to installation
The following documents are supplied with the unit:
Installation instructions
Software instructions
User manual
Wiring diagram
Instructions can be downloaded from Nilan’s website: https://www.nilan.dk/en-gb/frontpage/
download
If you have questions regarding installation of the unit after having read the instructions, contact your
nearest dealer of Nilan products. You can find Nilan dealers on www.nilan.dk/en-gb/frontpage/
download/dealers.
The purpose of these instructions is to advice the installer on correct installation and maintenance of
the unit.
ATTENTION
The unit must be started up immediately after installation and connection to the duct system.
When a ventilation unit is not in operation, humidity from the rooms may penetrate into the
ducts and create condensation. Condensate water may leak out of the valves and damage
furniture and floors. Condensation may also form inside the unit, which can damage its
electronics and fans.
The unit is delivered fully tested and ready for operation.
VP18 M2 (English) BY NILAN
5

Other manuals for nilan CTS602 HMI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the nilan CTS602 HMI and is the answer not in the manual?

nilan CTS602 HMI Specifications

General IconGeneral
Brandnilan
ModelCTS602 HMI
CategoryFan
LanguageEnglish

Related product manuals