nilan CTS602 HMI Installation Instructions

Fire connection
Y
ou can connect a fire thermostat or an external fire automation system. It must be a closed signal, so
that the unit will register that there is a fire if the signal is interrupted.
CTS602Fire thermostat
Shunt if not installed
NB! If you connect the unit to an external fire automation system, set the software: Service settings/
Restart/Fire. The unit will then start up again when the external fire automation system signals for it to
do so.
20

nilan CTS602 HMI Specifications

General

Brand	nilan
Model	CTS602 HMI
Category	Fan
Language	English