CLEAN WATER FILTER CLEANING (For BA 551D, BA 551CD, BA 611D)
Drive the machine on a level oor.1.
Turn the ignition key (80) to “0”.2.
Open the cover (22) and check that the recovery water tank (21) is empty, otherwise empty it with the drain hose (16).3.
Grasp the handle (41) and carefully lift the tank (40).4.
Slightly lift the hoses (A), then, operating on the clean water lter assembly (F), unscrew the transparent cover (B) and remove 5.
the lter strainer (C). Clean and install them on the support (D).
NOTE:
The lter strainer (C) must be correctly positioned on the housing (E) of the support (D).
Install the hoses (A) and the lter assembly (F).1.