EasyManuals Logo

Nilfisk-Advance S2 User Manual

Nilfisk-Advance S2
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
S2 / S3
03/2010
9
C344
US
How to change the bag
WARNING!
These operations can only be carried out by
trained and qualied personnel who must wear
adequate clothing, in compliance with the laws in
force.
Take care not to raise dust during these
operations. Wear a protective mask.
In case of dangerous and/or toxic dust, you must
use the supplied safety bag for these certied
vacuum cleaners.
The bag must only be disposed of by qualied
personnel and in compliance with the laws in
force.
Liquids vacuuming
WARNING!
Make sure that the vacuum cleaner is equipped with a
liquid level sensor and is suitable for vacuum liquids.
The lter element will be wet after liquids have been
vacuumed.
A wet lter element can quickly become clogged if the vacuum
cleaner is then used to vacuum dry substances.
For this reason, make sure that the lter element is dry or
replace it with another one before using the vacuum
cleaner for dry materials.
At the end of a cleaning session
Turn the vacuum cleaner off and disconnect the plug
from the socket.
Wind the connection cable up and hang it in the relevant
compartment (Fig. 13).
Empty the container as described in the “Emptying the
container” paragraph.
Clean the vacuum cleaner as described in the paragraph
“Maintenance, cleaning and decontamination”.
Wash the container with clean water if aggressive
substances have been vacuumed.
Store the vacuum cleaner in a dry place, out of reach of
unauthorized persons.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance S2 and is the answer not in the manual?

Nilfisk-Advance S2 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelS2
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals