Nilfisk-Advance S2 - Technical Specifications

C344
6
03/2010
S2 / S3
US
Technical Specications
Parameter Units
S2N1
(50 liter)
S2N6
(50 liter)
S3N1
(50 liter)
S3N1
(100 liter)
Voltage @ 60Hz Volts 120 120 120 120
Type of Power No. of phases 1 1 1 1
Power, max kW 2 1.6 2.4 2.4
Current Draw, rated Amps 14.5 11.5 15.8 15.8
Waterlift, max Inches H2O 83.1 71.5 71.5 71.5
Airow, max cfm 198 180 270 270
Filter Area, main Sq. ft 21 21 21 21
Filter Area, optional HEPA Sq. ft 37.7 37.7 37.7 37.7
Noise Level, @ 3’ 3”
(1 meter)
dB(A) 70 70 71 71
Protection Class IP 44 44 44 44
Insulation Class Class F F F F
Tank Capacity Gallons/liters 13/50 13/50 13/50 26/100
Machine Inlet Inches 3 3 3 3
Dimensions (l x w x h) Inches 31.5 x 23.6 x 51.2 31.5 x 23.6 x 51.2 31.5 x 23.6 x 51.2 31.5 x 23.6 x 62.2
Weight lbs. 139 139 150 157
Cord Length ft 30 30 30 30
Filter efciency, HEPA MPPS tested
99.995% @ 0.18
micron
99.995% @ 0.18
micron
99.995% @ 0.18
micron
99.995% @ 0.18
micron
■ Storage conditions:
T : -10°C ÷ +40°C
Humidity: 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
T : -10°C ÷ +40°C
Humidity: 85%