Ninja BL621 User Manual

6 7ninjakitchen.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
32 DO NOT perform grinding operations
with the Single-Serve Blending Cup and
Pro Extractor Blades® Assembly, or the
pitcher and Stacked Blade Assembly.
33 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are
properly installed before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers
to shatter and potentially result in
personal injury and property damage.
35 Keep hands and utensils out of
containers while chopping to reduce
the risk of severe personal injury or
damage to the blender/food chopper.
A scraper may be used ONLY when the
blender or processor is not running.
36 If you find unmixed ingredients sticking
to the sides of the cup, stop the
appliance, remove the blade assembly,
and use a scraper to dislodge ingredients.
37 DO NOT open the pitcher’s pour spout
cap while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing
lids and containers.
40 If the appliance overheats, a thermal
switch will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately
30 minutes before using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed
BEFORE emptying container’s
contents. Remove the blade assembly
by carefully grasping the top of the
shaft and lifting it from the container.
Failure to remove the blade assembly
before emptying the container results
in a risk of laceration.
43 If using the pitcher’s pour spout, hold
the cover in place on the container or
ensure lid lock is engaged when
pouring to avoid risk of injury.
44 Remove the Pro Extractor Blades®
Assembly from the Single-Serve Cup
upon completion of blending. DO NOT
store ingredients before or after
blending them in the cup with the blade
assembly attached. Some foods may
contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury.
For ingredient storage in the cup, use
only Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.

Ninja BL621 Specifications

General

Brand	Ninja
Model	BL621
Category	Blender
Language	English