- 56 -
Ｐｌａｃｅ ＦＰ １
If the following screen appears after the first fingerprint input,
take your finger off from the sensor.
Ｒｅｍｏｖｅ ＦＰ
Place the same fingerprint again.
Ｐｌａｃｅ ＦＰ ２
If the fingerprint input is successful, a success message will
appear. If it fails, a failure message will appear and you will
return to the initial registration screen.
⑥ Input password
If you select password authentication mode or other one that
includes password authentication, you must enter the password.
To Next Page
Loading...
