- 57 -
Password can be 4 - 8 characters long.
Ｉｎｐｕｔ Ｐａｓｓｗｄ １
：
For security, password is displayed as 『*』.
Ｉｎｐｕｔ Ｐａｓｓｗｄ １
：* * * *
Enter the password again for confirmation.
Ｉｎｐｕｔ Ｐａｓｓｗｄ ２
* * * *
If the password input is successful, a success message will
appear. If it fails, a failure message will appear and you will
return to the initial registration screen.
⑦ Input RF card.
If you chose to use RF card when you setup the system, use the
RF card to register the user. Place the RF card near the
fingerprint input sensor. If you did not choose the RF option
To Next Page
Loading...
