Nitronic ST215 - Unit Assembling Assembling the Assembling the the Centering Centering Centering Dev Dev Device Dev Ice

Sdasdasdsdfdsdcdscsdcdcd
cdcsc
12
Nitronic
NitronicNitronic
Nitronic
AG
AGAG
AG
Mattenstrasse 11
CH – 2555 Brügg Tel. +41 32 373 70 70
Switzerland
Fax
+41 32 373 70 75
23
25
26
22
Push the two keys (22)
(22)(22)
(22) out of the guides with a pair of tweezers and remove them Fig. 13.
• The guide plate (23)
(23)(23)
(23), the centering jaws (25)
(25)(25)
(25) and the helixes (26)
(26)(26)
(26) can now be removed together Fig. 14.
Fig. 13 Fig. 14
Assembling
Assembling Assembling
Assembling the
thethe
the centering
centering centering
centering device
devicedevice
device
• Reinstall guide plate (23)
(23)(23)
(23) and insert the centering jaws (25)
(25)(25)
(25) individually Fig. 15.
• Push all four centering jaws (25)
(25)(25)
(25) outwards to the stop on the stripping head and carefully put the helixes (26)
(26)(26)
(26) in
place Fig. 16.
Fig. 15 Fig. 16
• By rotating the helixes (26)
(26)(26)
(26) check that the centering jaws can close smoothly and simultaneously. If necessary
repeat the procedure.
23
25
26