Page | 21
Channels
A total of 5 available channels are supported. It is important to note that Perception Neuron 3 sensors
utilize 2.4g bandwidth to communicate to the transceiver. In Axis Studio, only three performers can be
capture simultaneously.
Transceiver
The transceiver is mainly used for instruction sending and data receiving. When attached to a computer,
the transceiver will be detected as a network device.
Details:
Instruction sending: the data transceiver receives the command from axis studio and sends it to each
sensor through 2.4GHz wireless bandwidth.
Data receiving: the transceiver receives the data from the sensors in real-time through the 2.4GHz
wireless network, synchronizes the time of the data, and transmits the data to Axis Studio.
LED status Description
To Next Page
Loading...