Page | 46
Post Body Dimension Adjustment
The body dimension of the avatar can be adjusted post capture, this can be done during the editing
process. If you want to create a custom body size based on the original template, select the body size
template you wish to use. The original body size name will automatically placed behind, then you can
enter the appropriate body size, click save to project to save. The original bone size will not be
overwritten. If you do not save to project, this modification is temporary.
Solver Parameter
Adjust algorithm behaviour to control motion capture performance.This operation can be done in the
Editing window prior to capture or during post processing in the Capture window.
Scenario
Choose the motion capture scenario you are using.
• If you are doing motion capture on a flat floor, use Single Level Constrain.
To Next Page
Loading...