Page | 47
• If you are capturing go upstairs, downstairs or any motion without a certain floor, use Free
Climbing.
• Hip Fixed means lock your Avatar in the certain position, you can use for captures that involve
running on a treadmill or when utilize wire rigs.
Contact Points
• Choose which body segment will make contact with the floor or a solid surface during the
performance.
• For most scenarios we choose foot contact, selected by default. If you want to record a
movement with hand contact such as cartwheel, select both the foot and the hand contact.
Contact Sensitivity
• Axis Studio will use a pattern recognition algorithm to determine the contact between the feet and
ground.
• The contact sensitivity value affects the speed of this status change.
• Larger values will plant the feet firmly on the ground and smaller values will allow the feet to slide
easily while contacting the ground
Joint Constraint Tolerance
• There are gaps between different body segments, use this option to modify the tolerence of the
gaps.
• The smaller the value is, the gaps will be bigger.
Contact Constraint Tolerance
• The contact constraint value determines the threshold a foot contact is activated.
• A higher value increases sensitivity of the foot contact algorithm. A low value reduces the
sensitivity of a foot contact.
To Next Page
Loading...