Nokia 7302 - Application; Log Filter Entry Match Commands; Match; Table 117 Match Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Events and Logs
Issue: 10 3HH-11982-AAAA-TQZZA 127
6.8.5 Log Filter Entry Match Commands
6.8.5.1 match
Table 117 match command
6.8.5.2 application
Table 118 application command
Item Description
Syntax [no] match
Context configure>log>filter filter-id>entry entry-id
Description This command creates context to enter/edit match criteria for a filter entry. When the match
criteria is satisfied, the action associated with the entry is executed.
If more than one match parameter (within one match statement) is specified, then all the criteria
must be satisfied (AND functional) before the action associated with the match is executed.
Use the applications command to display a list of the valid applications.
Match context can consist of multiple match parameters (application, event-number, severity,
subject), but multiple match statements cannot be entered per entry.
The no form of the command removes the match criteria for the entry-id.
Default No match context is defined.
Item Description
Syntax application {eq | neq} application-id
no application
Context configure>log>filter filter-id>entry entry-id>match
Description This command adds an OS application as an event filter match criterion.
An OS application is the software entity that reports the event. Applications include IP, MPLS,
OSPF, CLI, SERVICES etc. Only one application can be specified. The latest application
command overwrites the previous command.
The no form of the command removes the application as a match criterion.
Default no application — No application match criterion is specified.
(1 of 2)