Nokia 7302 - Inactivity-Timer; Remote-Mepid; Table 211 Remote-Mepid Command; Table 212 Inactivity-Timer Command

Ethernet Connection Fault Management
186
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
8.12.1.6 remote-mepid
Table 211 remote-mepid command
8.12.1.7 inactivity-timer
Table 212 inactivity-timer command
8.12.1.8 y1731pm
Table 213 y1731pm command
Item Description
Syntax [no] remote-mepid mep-id
Context configure>eth-cfm>domain>association
Description This command configures the remote maintenance association end point MEP identifier.
Parameters imep-id — Maintenance association end point identifier of a remote MEP whose information
from the MEP database is to be returned.
Values: 1...8191
Item Description
Syntax inactivity-timer timeout
Context configure>eth-cfm>slm
Description Configure the SLM inactivity timer for maintaining stale test data.
Default 100 seconds
Parameters inactivity-timer timeout
Values: 10...100
Item Description
Syntax domain md-index association ma-index mep mep-id session session-id [create]
Context configure>eth-cfm>y1731pm
Description This command creates a y1731pm session for the given mep.
The no form of the command will remove the y1731pm session.
(1 of 2)