System Management
36
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
3.5.3.6 user-user-hairpin
Table 24 user-user-hairpin command
3.5.3.7 vlan-dot1q-etype
Table 25 vlan-dot1q-etype command
3.5.3.8 core1-uptime
Table 26 core1-uptime command
Table 27 describes the command output fields.
Table 27 System Timing Output Fields
Item Description
Syntax user-user-hairpin
Context show>system
Description This command displays the status of user-user-hairpin communication (enabled or disabled).
Item Description
Syntax vlan-dot1q-etype
Context show>system
Description This command displays the system default vlan-dot1q-etype value.
Item Description
Syntax core1-uptime
Context show
Description This command displays the time since the system started.
Label Description
System Up Time Displays the length of time the system has been up in days, hr:min:sec format.
To Next Page
Loading...
