Nokia 7302 - Page 205

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Ethernet Connection Fault Management
Issue: 10 3HH-11982-AAAA-TQZZA 205
Output example;
show eth-cfm y1731pm curr-15min-stats domain 3 association 2 mep 1 session 1
==================================================================
ETH-CFM Y.1731 Current 15 Min Statistics
==================================================================
------------------------------------------------------------------
Domain : 3 Association : 2
Mep : 1 Session : 1
Test type : single-end-loss Admin status : Enabled
Priority : 7 Period : 60
Peer Mac Addr : 00:07:72:a8:54:ad Measurement-period : 300
Data TLV size : 0 Interval-status : Valid
Remote Mep Id : 0 Test Id : 0
Total Rx
Near end/Far end
The value of Rx Near end is the accumulated number of frames received at the local
service endpoint of this MEP(RxFCl), and within the loss test duration of 15 Minutes.
The value of Rx Far end is the accumulated number of frames received at the far-end
service endpoint(RxFCf), and within the loss test duration of 15 Minutes. For SLM, this
is the value of TxFCf.
Total Loss
Near end/Far end
The value of Loss near end is the accumulated number of loss frames at the local
service endpoint of this MEP, and within the loss test duration of 15 Minutes.
The value of Loss far end is the accumulated number of loss frames at the far-end
service endpoint, and within the loss test duration of 15 Minutes.
Min Frames Loss
Ratio
Near-End(%)/Far
end(%)
The value of minimum loss ratio near end is the minimum value of accumulated Loss
Ratio, at the local service endpoint of this MEP, and within the loss test duration of 15
Minutes. It is expressed in hundredth of a percent accuracy.
The value of minimum loss ratio far end is the minimum of accumulated Loss Ratio, at
the far-end service endpoint, and within the loss test duration of 15 Minutes. It is
expressed in hundredth of a percent accuracy.
Avg Frames Loss
Ratio
Near-End(%)/Far
end(%)
The value of average loss ratio near end is the average value of accumulated Loss
Ratio, at the local service endpoint of this MEP, and within the loss test duration of 15
Minutes. It is expressed in hundredth of a percent accuracy.
The value of average loss ratio far end is the average of accumulated Loss Ratio, at the
far-end service endpoint, and within the loss test duration of 15 Minutes. It is expressed
in hundredth of a percent accuracy.
Max Frames Loss
Ratio
Near-End(%)/Far
end(%)
The value of maximum loss ratio near end is the maximum value of accumulated Loss
Ratio, at the local service endpoint of this MEP, and within the loss test duration of 15
Minutes. It is expressed in hundredth of a percent accuracy.
The value of maximum loss ratio far end is the maximum of accumulated Loss Ratio, at
the far-end service endpoint, and within the loss test duration of 15 Minutes.It is
expressed in hundredth of a percent accuracy.
Label Description
(2 of 2)