38
Nokia A032 Advanced User Guide
Key 1
Key 2
Key 3
Key 4
These fields are used to enter the shared WEP key values.
Note that the values are not displayed after entry (they
appear as ****). If you want to enter keys in hexadecimal,
prefix them with 0x.
Important: The keys will only work if their length is
within the Valid Size limits (see below). A valid key is
shown in green. If you enter a key that is too long, it will
be shown in red.
Valid Size (Read only) Tells you the valid size of the password for
the current setting of WEP Key Policy. This indicates how
many characters should be in the WEP key.
Active Key This determines which of the four shared WEP keys is
active (i.e. used for transmission).
WEP Key Policy This parameter determines the number of bits allowed
for the WEP keys.
• Normal – IEEE802.11 compatible mode: 40 bits
• Strong – 128-bit key length
• Custom – See Min and Max key length settings in
Advanced WEP setup on page 49
Option Description
A032-Adv.book Page 38 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
