5. Slide the back cover back to place.
Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the power
cord to the device. If
the battery is
completely
discharged, it may
take a while before
the charging indicator
starts scrolling.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but
the charging levels may vary. To reach the full
operation time, charge the battery until it has been
fully charged according to the battery level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E66 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
Insert the memory
card
Memory card may already be inserted in your device.
Memory cards are also available as separate
enhancements.
1. With the back of the device facing you, press the
release buttons (1) and slide the back cover off (2).
2. Insert the memory card in the slot with the contact
area first. Make sure that the contact area is facing
the connectors on the device.
14
Cyan
Magenta
Yellow
Black
Cyan
Magenta
Yellow
Black
To Next Page
Loading...
Need help?
General
