Set up an internet access
point for packet data (GPRS)
1. Select Menu > Tools > Settings >
Connection > Access points.
2. Select Options > New access point to create a
new access point, or select an existing access point
from the list and then Options > Duplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
• Connection name — Enter a descriptive name
for the connection.
• Data bearer — Select Packet data.
• Access point name — Enter the name for the
access point. The name is usually provided by
your service provider.
• User name — Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
• Prompt password — Select Yes to enter your
password each time you log into a server or No
to save the password in your device memory and
automate the login.
• Password — Enter your password if required by
the service provider. The password is often case-
sensitive and provided by the service provider.
• Authentication — Select Secure to send your
password always encrypted, or Normal to send
your password encrypted when possible.
• Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
4. After defining the settings, select Options >
Advanced settings to define the advanced
settings or Back to save the settings and exit.
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select Connect PC to web. The necessary Windows
software is automatically installed from your device
to the PC.
3. Accept the installation in your PC. If asked, accept
also the connection. When the connection to the
web is established, the web browser of your PC
opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC. If not, run the
setup.exe file from the CD-ROM drive of your PC.
43
Cyan
Magenta
Yellow
Black
Cyan
Magenta
Yellow
Black
To Next Page
Loading...
Need help?
General
