information management department.
Configuration settings may include
connection and other settings used by
different applications in your device.
The available options may vary.
The remote configuration connection is
usually started by the server when the
device settings need to be updated.
To create a new server profile, select
Options > Server profiles >
Options > New server profile.
You may receive these settings from
your service provider in a configuration
message. If not, define the following:
Server name — Enter a name for the
configuration server.
Server ID — Enter the unique ID to
identify the configuration server.
Server password — Enter a password
to identify your device to the server.
Access point — Select the access point
to use for the connection, or create a
new access point. You can also choose
to be asked for the access point every
time you start a connection. This setting
is available only if you have selected
Internet as the bearer type.
Host address — Enter the web address
of the configuration server.
Port — Enter the port number of the
server.
User name and Password — Enter your
user ID and password for the
configuration server.
Allow configuration — Select Yes to
allow the server to initiate a
configuration session.
Auto-accept all requests — Select
Yes if you do not want the server to ask
for your confirmation when it initiates
a configuration session.
Network authentication — Select
whether to use http authentication.
Network user name and Network
password — Enter your user ID and
password for the http authentication.
This setting is available only if you have
selected Network authentication to
be used.
To connect to the server and receive
configuration settings for your device,
select Options > Start configuration.
142 Security and data management
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
