Route guidance uses a rotating compass
on the device display. A red ball shows
the direction to the destination, and the
approximate distance to it is shown
inside the compass ring.
Route guidance is designed to show the
straightest route and the shortest
distance to the destination, measured
in a straight line. Any obstacles on the
route, such as buildings and natural
obstacles, are ignored. Differences in
altitude are not taken into account
when calculating the distance. Route
guidance is active only when you move.
To set your trip destination, select
Options > Set destination and a
landmark as the destination, or enter
the latitude and longitude coordinates.
To clear the destination set for your trip,
select Stop navigation.
Trip meter
Select Menu > Applications >
Location > GPS data and Trip
distance.
The trip meter has limited accuracy, and
rounding errors may occur. Accuracy can
also be affected by availability and
quality of GPS signals.
To turn trip distance calculation on or
off, select Options > Start or Stop. The
calculated values remain on the display.
Use this feature outdoors to receive a
better GPS signal.
To set the trip distance and time and
average and maximum speeds to zero,
and to start a new calculation, select
Options > Reset. To set the trip meter
and total time to zero, select Restart.
Positioning settings
Select Menu > Ctrl. panel > Settings
and General > Positioning.
Positioning methods
Select from the following:
Integrated GPS — Use the integrated
GPS receiver of your device.
Assisted GPS — Use Assisted GPS (A-
GPS) to receive assistance data from an
assistance data server.
Bluetooth GPS — Use a compatible
external GPS receiver with Bluetooth
connectivity.
Positioning (GPS) 97
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
