During a call
Mute or unmute the microphone
Select Options > Mute or Unmute.
Put an active voice call on hold
Select Options > Hold.
Activate the loudspeaker
Select Options > Activate
loudspeaker. If you have attached a
compatible headset with Bluetooth
connectivity, to route the sound to the
headset, select Options > Activate
handsfree.
Switch back to the handset
Select Options > Activate handset.
End a call
Press the end key.
Switch between active and held calls
Select Options > Swap.
Tip: To put an active call on hold, press
the call key. To activate the held call,
press the call key again.
Send DTMF tone strings
1 Select Options > Send DTMF.
2 Enter the DTMF string or search for
it from the contacts list.
3 To enter a wait character (w) or a
pause character (p), press *
repeatedly.
4 To send the tone, select OK. You can
add DTMF tones to the phone
number or DTMF field in contact
details.
End an active call and replace it with
another incoming call
Select Options > Replace.
End all calls
Select Options > End all calls.
Many of the options that you can use
during a voice call are network services.
Voice mail
Select Menu > Ctrl. panel > Call
mailbox.
When you open the Voice mail
application (network service) for the
first time, you are asked to enter the
number of your voice mailbox.
32 Make calls
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
