WLAN settings
Select Menu > Ctrl. panel > Settings
and Connection > Wireless LAN.
To have an indicator displayed when
there is a wireless LAN (WLAN) available
in your current location, select Show
WLAN availability > Yes.
To select the interval for your device to
scan for available WLANs, and to update
the indicator, select Scan for
networks. This setting is not available
unless you select Show WLAN
availability > Yes.
To set the device to test the internet
capability of the selected WLAN
automatically, to ask for permission
every time, or to never perform the
connectivity test, select Internet
connectivity test > Run
automatically, Ask every time, or
Never run. If you select Run
automatically or allow the test to be
performed when the device asks for it,
and the connectivity test is performed
successfully, the access point is saved to
internet destinations.
To check the unique media access
control (MAC) address that identifies
your device, enter *#62209526# in the
home screen. The MAC address is
displayed.
Active data connections
Select Menu > Ctrl. panel >
Connectivity > Conn. mgr..
Select Active data connections.
In the active data connections view, you
can see the open data connections:
data calls
packet data connections
wireless LAN (WLAN)
connections
Note: The actual invoice for calls
and services from your service provider
may vary, depending on network
features, rounding off for billing, taxes,
and so forth.
To end a connection, select Options >
Disconnect.
72 Connectivity
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
