you may not be able to create, edit, or
remove them.
Select a destination and Options >
Edit, and define the following:
Connection name — Enter a name for
the VPN access point.
VPN policy — Select the VPN policy to
combine with the internet access point.
Internet access point — Select the
internet access point with which to
combine the VPN policy to create secure
connections for data transfer.
Proxy server address — Enter the
proxy server address of the private
network.
Proxy port number — Enter the proxy
port number.
Use access point — Select whether
connections using this access point are
established automatically.
The settings available for editing may
vary.
For the correct settings, contact your
company's IT department.
Use a VPN connection in an
application
You may have to prove your identity
when you log on to the enterprise
network. Contact your company's IT
department for the credentials.
To use a VPN connection in an
application, the application must be
associated with a VPN access point.
Tip: You can configure the application's
connection setting to Always ask, in
which case you select the VPN access
point from a list of connections when a
connection is established.
1 In the application in which you
want to create a VPN connection,
select a VPN access point as the
access point.
2 If you are using legacy
authentication, enter your VPN user
name and passcode or password. If
the SecurID token has become out
of synchronisation with the clock of
the ACE/Server, enter the next
passcode. If you are using
certificate-based authentication,
you may have to enter the key store
password.
150 Security and data management
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
