Nokia E5 - Page 165

802.1x security settings
Select 802.1x as the WLAN security
mode.
802.1x authenticates and authorises
devices to access a wireless network,
and prevents access if the authorisation
process fails.
Select WLAN security settings and
from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared
key (a secret key used for device
identification).
EAP plug-in settings — If you selected
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
Pre-shared key — If you selected
WPA/WPA2 > Pre-shared key, enter
the shared private key that identifies
your device to the WLAN to which you
connect.
WPA security settings
Select WPA/WPA2 as the WLAN security
mode.
Select WLAN security settings and
from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared
key (a secret key used for device
identification).
EAP plug-in settings — If you select
WPA/WPA2 > EAP, select which EAP
plug-ins defined in your device to use
with the access point.
Pre-shared key — If you select WPA/
WPA2 > Pre-shared key, enter the
shared private key that identifies your
device to the WLAN to which you
connect.
WPA2 only mode — To allow both TKIP
and AES (Advanced Encryption
Standard) encryption, select Off. To
allow AES only, select On
Wireless LAN plugins
Select Menu > Ctrl. panel > Settings
and Connection > Destinations, and
an access point group.
The extensible authentication protocol
(EAP) plug-ins are used in wireless
networks to authenticate wireless
devices and authentication servers, and
the different EAP plug-ins make possible
the use of various EAP methods
(network service).
Settings 165
© 2010 Nokia. All rights reserved.
.