1To pair with a device, select
Options > New paired device.
Devices that are within range are
displayed.
2 Select the device, and enter the
passcode. The same passcode must
be entered on the other device as
well.
3 Some audio enhancements connect
automatically to your device after
pairing. Otherwise, scroll to the
enhancement, and select
Options > Connect to audio
device.
Paired devices are indicated by
in the
device search.
To set a device as authorised or
unauthorised, scroll to the device, and
select from the following options:
Set as authorised — Connections
between your device and the
authorised device can be made without
your knowledge. No separate
acceptance or authorisation is needed.
Use this status for your own devices,
such as your compatible headset or PC
or devices that belong to someone you
trust.
indicates authorised devices in
the paired devices view.
Set as unauthorised — Connection
requests from this device must be
accepted separately every time.
To cancel a pairing, scroll to the device,
and select Options > Delete.
If you want to cancel all pairings, select
Options > Delete all.
Receive data using Bluetooth
connectivity
When you receive data through
Bluetooth connectivity, a tone sounds,
and you are asked if you want to accept
the message. If you accept,
is
displayed, and the item is placed in the
Inbox folder in Messaging. Messages
received through Bluetooth
connectivity are indicated by
.
Tip: If your device notifies you that the
memory is full when you try to receive
data through Bluetooth connectivity,
change memory card as the memory
where the data is stored.
76 Connectivity
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
