Adjust the exposure compensation (images only).
The available options vary depending on the capture mode and view you are in. The
settings return to the default values when you close the camera.
To customise the camera toolbar, switch to image mode, and select Options >
Customise toolbar.
To view the toolbar before and after capturing an image or recording a video, select
Options > Show toolbar.
To view the toolbar only when you need it, select Options > Hide toolbar.
Scenes
Select Menu > Media > Camera.
A scene helps you to find the right colour and lighting settings for the current
environment. The settings of each scene have been set according to a certain style or
environment.
To change the scene, select Scene modes from the toolbar.
To make your own scene, scroll to User defined, and select Options > Change.
To copy the settings of another scene, select Based on scene mode and the desired
scene.
To activate your own scene, select User defined > Select.
Capture images in a sequence
Select Menu > Media > Camera.
To capture several images in a sequence, if enough memory is available, select
Sequence mode from the toolbar and press the capture key.
The captured images are shown in a grid on the display. To view an image, scroll to it
and press the scroll key. If you used a time interval, only the last image is shown on the
display, and the other images are available in Gallery.
To send the image, select Options > Send.
To send the image to a caller during an active call, select Options > Send to caller.
Media 113
To Next Page
Loading...
