All calls are forwarded to another number. If you have two phone lines, a
number indicates the active line.
A headset is connected to the device.
A handsfree car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push to talk (PTT) connection.
Your push to talk connection is in do not disturb mode, because the ringing
type of your device is set to Beep once or Silent, or you have an incoming
or ongoing phone call. In this mode, you cannot make PTT calls.
Write text
The input methods provided in the device may vary according to different sales markets.
Traditional text input
indicates traditional text input.
and indicate the uppercase and lowercase. indicates the sentence
case, that is, the first letter of the sentence is written in uppercase and all the other
letters are automatically written in lowercase.
indicates number mode.
To write text with the keypad, press a number key, 2-9, repeatedly until the desired
character is displayed. There are more characters available for a number key than are
printed on the key. If the next letter is located on the same key as the present one, wait
until the cursor is displayed, and enter the letter.
To insert a number, press and hold the number key.
To switch between the different character cases and modes, press #.
Nokia E52 – The basics 29
To Next Page
Loading...
