2 If you are using legacy authentication, enter your VPN user name and passcode or
password. If the SecurID token has become out of synchronisation with the clock of
the ACE/Server, enter the next passcode. If you are using certificate-based
authentication, you may have to enter the key store password.
Settings
Select Menu > Ctrl. panel > Settings.
You can define and modify various settings of your device. Modifying these settings
affects the operation of your device across several applications.
Some settings may be preset for the device or sent to you in a special message by your
service provider. You may not be able to change such settings.
Select the setting you want to edit to do the following:
• Switch between two values, such as on or off.
• Select a value from a list.
• Open a text editor to enter a value.
• Open a slider, and scroll left or right to adjust a value.
General settings
Select Menu > Ctrl. panel > Settings and General.
Select from the following:
Personalisation — Change the display settings, and personalise the device.
Date and time — Change the date and time.
Enhancement — Define the settings for your accessories.
Sensor settings — Change the sensor settings.
Security — Define the security settings.
Factory settings — Restore the original settings of the device.
Positioning — Define the positioning method and server for GPS-based applications.
Personalisation settings
Select Menu > Ctrl. panel > Settings and General > Personalisation.
Display settings
To define the level of light that the device needs before switching on the backlight,
select Display > Light sensor.
Settings 161
To Next Page
Loading...
