Nokia E52 - Page 28

You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have activated the Silent profile, and the device does not ring for an
incoming call or message.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When the indicator is blinking, your
device is trying to connect with another device.
A GPRS packet data connection is available (network service). indicates
that the connection is active.
indicates that the connection is on hold.
An EGPRS packet data connection is available (network service). indicates
that the connection is active.
indicates that the connection is on hold.
A UMTS packet data connection is available (network service). indicates
that the connection is active.
indicates that the connection is on hold.
High-speed packet access (HSPA) is supported and available (network
service). The icon may vary between regions.
indicates that the
connection is active.
indicates that the connection is on hold.
You have set the device to scan for wireless LANs (WLAN), and a WLAN is
available.
A WLAN connection is active in a network that does not have encryption.
A WLAN connection is active in a network that has encryption.
Your device is connected to a computer with a USB data cable.
The second phone line is being used (network service).
28 Nokia E52 – The basics