To make calls, you must first leave the remote SIM mode. If the device has been locked,
enter the lock code to unlock it first.
1 Select Options > New paired device. The device starts to search for Bluetooth
devices within range. If you have sent data using Bluetooth connectivity before, a
list of the previous search results is displayed. To search for more Bluetooth devices,
select More devices.
2 Select the device with which you want to pair, and enter the passcode. The same
passcode must be entered in the other device as well.
3 To make the connection between your device and the other device automatic, select
Yes. To confirm the connection manually every time a connection attempt is made,
select No. After pairing, the device is saved to the paired devices page.
To give a nickname to the paired device, select Options > Assign short name. The
nickname is displayed in your device.
To delete a pairing, select the device whose pairing you want to delete and Options >
Delete. To delete all pairings, select Options > Delete all. If you are currently connected
to a device and cancel the pairing with that device, pairing is removed immediately,
and the connection is ended.
To allow a paired device to connect automatically to your device, select Set as
authorised. Connections between your device and the other device can be made
without your knowledge. No separate acceptance or authorisation is needed. Use this
status only for your own devices, such as your compatible headset or computer, or
devices that belong to someone you trust. If you want to accept connection requests
from the other device separately every time, select Set as unauthorised.
To use a Bluetooth audio accessory, such as a Bluetooth handsfree or headset, you need
to pair your device with the accessory. For the passcode and further instructions, see
the accessory user guide. To connect to the audio accessory, switch on the accessory.
Some audio accessories connect automatically to your device. Otherwise, open the
paired devices tab, and select the accessory and Options > Connect to audio device.
Block devices
Select Menu > Ctrl. panel > Connectivity > Bluetooth.
1 To block a device from establishing a Bluetooth connection to your device, open the
paired devices tab.
2 Select a device you want to block and Options > Block.
To allow the pairing of a device again after it was blocked, delete it from the blocked
devices list.
Connectivity 143
To Next Page
Loading...
