Common accessory settings
Select Menu > Ctrl. panel > Settings and General > Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an accessory to your device, select
the accessory and Default profile.
To set the device to answer phone calls automatically after 5 seconds when an accessory
is attached, select Automatic answer > On. If the ringing type is set to Beep once or
Silent in the selected profile, automatic answering is disabled.
To illuminate the device while it is attached to an accessory, select Lights > On.
Turn to silence calls or alarms
When you activate the sensors in your device, you can control certain functions by
turning the device.
Select Menu > Ctrl. panel > Settings and General > Sensor settings.
Select from the following:
Sensors — Set the display to rotate automatically according to the device's orientation.
Turning control — Set the device to silence incoming calls or snooze alarms when you
turn the device face down. To enable this option, the Sensors option needs to be
activated.
Security settings
Security settings
Select Menu > Ctrl. panel > Settings and General > Security.
Select from the following:
Phone and SIM card — Modify the security settings for your device and SIM card.
Certificate management — Manage your security certificates.
Protected content — Modify your settings for DRM-protected content.
Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers to prevent accidental dialling
of the emergency number. Codes are shown as asterisks. When you change a code, enter
the current code, then the new code twice.
164 Settings
To Next Page
Loading...
