Nokia E70 User Manual

The settings available for editing may vary.
WPA security settings
Select Menu > Tools > Settings > Connection > Access
points. Select Options > New access point, or select an
access point and Options > Edit.
In the access point settings, select WLAN security
mode > WPA/WPA2.
Select WLAN security sett.. and from the following:
• WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
• EAP plug-in settings — If you select WPA mode >
EAP, select which EAP plug-ins defined in your device
to use with the access point.
• Pre-shared key — If you select WPA mode > Pre-
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
• TKIP encryption — To enable TKIP encryption, based
on transient keys changed often enough to prevent
misuse, select Allowed. All devices in the wireless
LAN must either allow or prevent the use of TKIP
encryption.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol)
plug-ins currently installed in your device (network
service), select Menu > Tools > Settings > Connection >
Access points. Select Options > New access point and
define an access point that uses wireless LAN as a data
bearer and 802.1x or WPA/WPA2 as their security mode.
Select WLAN security sett. > WPA mode > EAP, scroll to
EAP plug-in settings, and press the joystick.
EAP settings
Select Menu > Tools > Settings > Connection > Access
points. Select Options > New access point, or select an
access point and Options > Edit.
Select WLAN security mode > 802.1x or WPA/WPA2.
Select WLAN security sett. > WPA mode > EAP, scroll to
EAP plug-in settings, and press the joystick.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use with
this access point have a check mark next to them. To
not use a plug-in, select Options > Disable.
To edit the EAP plug-in settings, select Options >
Configure.
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network
with the access point, or Options > Lower priority to use
this plug-in for network authentication after
attempting to use other plug-ins.
The available options may vary.
See the device help for more information on EAP
plugins.
92
Settings
file:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 92 Apr 19, 2006 9:43:04 AMfile:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 92 Apr 19, 2006 9:43:04 AM

Nokia E70 Specifications

General

Zoom capability	2x
Rear camera type	Single camera
Rear camera resolution	1600 x 1200 pixels
Video capture resolution (max)	352 x 288 pixels
2G standards	GPRS
Ringer type	Polyphonic
FM radio	No
Panel type	TFT
Display resolution	352 x 416 pixels
Internal memory	75 MB
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Bundled software	PC Suite
Product color	Silver
Talk time (2G)	7.3 h
Battery capacity	1150 mAh
Standby time (2G)	216 h
Keyboard layout	QWERTY

Weight and Dimensions

Depth	53 mm
Width	117 mm
Height	22 mm
Weight	127 g