RealPlayer attempts automatically to reconnect to the
Internet access point.
To save a media clip, select Options > Save, scroll to a
folder in device memory or on a memory card, and
select Save. To save a link to a media file on the Web,
select Save link.
To fast-forward or rewind the clip during playback,
scroll up or down.
To increase or decrease the volume during playback,
scroll right or left.
Settings
Select Menu > Media > RealPlayer > Options > Settings.
Video settings
Select Video > Loop > On, if you want to replay video
clips automatically after they finish playing.
Connection settings
Select Connection, scroll to the following settings, and
press the joystick to edit:
• Proxy — Select whether to use a proxy server and to
key in the proxy server's IP address and port number.
• Network — Change the access point to connect to
the Internet and to set the port range used when
connecting.
Proxy settings
Proxy servers are intermediate servers between media
servers and their users. Some service providers use
them for additional security or to speed up access to
Web pages that contain media files.
Contact your service provider for the correct settings.
Select Connection > Proxy, scroll to the following
settings, and press the joystick to edit:
• Use proxy — Select Enable to use a proxy server.
• Proxy serv. address — Enter the IP address of the
proxy server. This setting is only available if you
select to use a proxy server.
• Proxy port number — Enter the port number of the
proxy server. This setting is only available if you
select to use a proxy server.
Network settings
Contact your service provider for the correct settings.
Select Connection > Network, scroll to the following
settings, and press the joystick to edit:
• Default access point — Scroll to the access point to
connect to the Internet, and press the joystick.
• Online time — Set the time when RealPlayer
disconnects from the network when you pause a
media clip that plays using a network link. Select
User defined, and press the joystick. Enter the time,
and select OK.
• Lowest UDP port — Enter the lowest port number of
the server port range. The minimum value is 1024.
• Highest UDP port — Enter the highest port number
of the server port range. The maximum value is
65535.
73
Media applications
file:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 73 Apr 19, 2006 9:43:04 AMfile:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 73 Apr 19, 2006 9:43:04 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
