selected only once and cannot be changed if you
have saved or exited from the mailbox settings. If
you use the POP3 protocol, e-mail messages are not
updated automatically when you are online. To see
the latest e-mail messages, you must disconnect and
make a new connection to your mailbox.
• Security (ports) — Select the security option used to
increase the security of the connection.
• Port — Define a port for connection.
• APOP secure login (for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
• My e-mail address — Enter the e-mail address given
to you by your service provider. Replies to your
messages are sent to this address.
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail
service.
• Outgoing mail serv. — Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
• Access point in use — Select the Internet access point
that the device uses for sending the e-mail messages
that you send.
• Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
• Port — Define a port for connection.
User settings
Select User settings and from the following settings:
• My name — Enter a name to appear before your e-
mail address when you send e-mail.
• Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and enter
the e-mail address to which you want to direct the
replies. You can only enter one address to which
replies are directed.
• Delete e-mails from — Select whether you want to
delete the e-mails only from the device or from both
the device and the server. Select Always ask if you
want to confirm from where the e-mail should be
deleted every time you delete an e-mail.
• Send message — Select to send the e-mail as soon
as possible, to send it the next time you retrieve e-
mail, or to store the e-mail in the Outbox, from where
you can send it later.
• Send copy to self — Select whether you want to save
a copy of the e-mail to your remote mailbox and to
the address defined in My e-mail address in the
settings for Outgoing e-mail.
• Include signature — Select whether you want to
attach a signature to your e-mail messages.
• New e-mail alerts — Select whether you want to
receive the new e-mail indications, a tone and a
note, when new mail is received to the mailbox.
• Default encoding — Select the preferred method for
character encoding.
Retrieval settings
Select Retrieval settings and from the following
settings:
50
Messages
file:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 50 Apr 19, 2006 9:43:04 AMfile:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 50 Apr 19, 2006 9:43:04 AM
To Next Page
Loading...
