Installation overview
30
Nokia FastMile 4G Receiver Installation Guide
3TG-00387-ABBA-TCZZA Issue: 01
Table 4 lists the chapters or sections to use to install a Nokia FastMile 4G Receiver
that will be remotely managed by the Nokia Altiplano FastMile Controller or an ACS.
The table also indicates if and how the Nokia Wireless app is used.
If a FastMile 4G Receiver that is managed by the Nokia Altiplano FastMile Controller
needs to be installed again, the Subscription ID of the FastMile 4G Receiver must be
manually deleted from the Nokia Altiplano FastMile Controller database. Once the
Subscription ID has been deleted from the Nokia Altiplano FastMile Controller
database, the re-installation can be done using the Nokia Wireless app as if it is a
fresh installation.
Table 4 Installation overview
Note — The NETCONF version of the FastMile 4G Receiver
for remote management from the Nokia Altiplano FastMile
Controller is not supported from FM 2.0.03a.
Installation task
Remote management method
Nokia Altiplano FastMile
Controller (through
NETCONF)
ACS (through
TR-069)
Reviewing safety information Chapter 6 Chapter 6
Identifying package contents Chapter 7 Chapter 7
Reviewing roles and installation prerequisites Chapter 8 Chapter 8
Inserting the SIM card in the Nokia FastMile
4G Receiver
Chapter 9 Chapter 9
Determining the mounting location for the
Nokia FastMile 4G Receiver
Section 10.2
Uses the Nokia Wireless app
in conjunction with the Nokia
Altiplano FastMile Controller
and the Nokia FastMile 4G
Receiver
Section 10.3
Uses the Nokia
Wireless app in
conjunction with the
Nokia FastMile 4G
Receiver
Mounting and connecting the Nokia FastMile
4G Receiver on a wall or pole (includes
powering up and checking LEDs)
Chapter 11 Chapter 11
Troubleshooting Chapter 12 Chapter 12
To Next Page
Loading...
