Determining the mounting location
28
Nokia FastMile 4G Receiver Installation Guide
3TG-00387-AADA-TCZZA Issue: 02 DRAFT
2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how
to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the MAC
address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G
Receiver.
The QR code is provided on a sheet of paper in the shipping package of the Nokia FastMile
4G Receiver. The sheet of paper should be saved for anyone who later needs to scan the
QR code when accessing the Nokia FastMile 4G Receiver through a mobile phone after
installation is complete.
Figure 10 shows the screen for the prompt to scan the QR code.
Figure 10 Screen with prompt to scan the QR code for unit that will be
managed by the Nokia Altiplano FastMile Controller through
NETCONF
Tap on “Scan” to start the scan of the QR code.
Use the viewfinder of the phone to align with the QR code.
Figure 11 shows the QR code screen.
To Next Page
Loading...
