Nokia G-2426G-A - Configuring the URL Filter

Table 7-25 IP Filter parameters (continued)
Field Description
Remote IP Address Enter the remote IP address.
Destination Subnet Mask Enter the destination subnet mask.
Protocol Select an application protocol or ALL from the list.
3
Click Add.
END OF STEPS
7.32 Configuring the URL filter
1
Click Security→URL Filter from the left pane in the GPON Home Gateway page. The URL
Filter page displays.
Figure 7-32 URL Filter page
Configure a G-2426G-A indoor ONT
Security configuration
Configuring the URL filter
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
128 Issue 1