7.55 Resetting to factory defaults
1
Click Maintenance→Factory Default from the left pane in the GPON Home Gateway page.
The Factory Default page displays.
2
Click Factory Default to reset the ONT to its factory default settings.
END OF STEPS
Figure 7-52 Factory Default page
Configure a G-2426G-A indoor ONT
Maintenance
Resetting to factory defaults
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
162 Issue 1
To Next Page
Loading...
