2
Configure the following parameters:
Table 7-40 SLID Configuration parameters
Field Description
Current SLID Displays the current SLID.
Enter New SLID Enter the new SLID.
SLID Mode Select a SLID mode from the list.
The default is HEX Mode.
3
Click Save.
END OF STEPS
7.50 Managing the device
1
Click Maintenance→Device Management from the left pane in the GPON Home Gateway
page. The Device Management page displays.
Configure a G-2426G-A indoor ONT
Maintenance
Managing the device
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
156 Issue 1
To Next Page
Loading...
