When the password does not meet the password rules, the application displays a message to
indicate which password rule has not been followed, for example:
• the password is too short
• the password is too long
• the first character cannot be a special character
• there are not enough character classes
1
Click Maintenance→Password from the left pane in the GPON Home Gateway page. The
Password page displays.
2
Configure the following parameters:
Figure 7-43 Password page
Configure a G-2426G-A indoor ONT
Maintenance
Configuring the password
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
150 Issue 1
To Next Page
Loading...
