Nokia G-2426G-A - Page 66

16
Activate and test the services; see the 7368 Hardware and Cabling Installation Guide.
17
If necessary, reset the ONT.
a. Locate the Reset button on a G-2426G-A indoor ONT as shown in
Figure 6-1, “G-2426G-A
indoor ONT connections” (p. 63)
.
b. Insert the end of a straightened paper clip or other narrow object into the hole in the Reset
button to reset the ONT.
END OF STEPS
Replace a G-2426G-A indoor ONT
Procedure
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
66 Issue 1