2
Configure the following parameters:
Table 7-13 Wireless (2.4GHz) parameters
Field Description
Enable Select this checkbox to enable Wi-Fi.
Mode Select a Wi-Fi mode from the list:
• auto (b/g/n)
• b
• g
• n
• b/g
• g/n
Bandwidth Select from:
• 20 MHz
• 40 MHz
• 20/40 MHz
Channel Select a channel from the list or select Auto to have the channel automatically assigned.
Transmitting Power Select a percentage for the transmitting power from the list:
• Low (25%)
• Medium (50%)
• High (75%)
• Maximum (100%)
WMM Select Enable or Disable from the list to enable or disable WiFi multimedia.
Total MAX Users Enter the number of total MAX users.
SSID Configuration
SSID Select
1
Select the SSID from the list.
SSID Name Enter the SSID name.
Enable SSID Enable or disable SSID from this list.
SSID Broadcast Enable or disable SSID broadcast from this list.
Port Mode Select a port mode from the list. Route is the default.
Isolation Enable or disable isolation from this list.
MAX Users Enter the number of MAX users.
Configure a G-2426G-A indoor ONT
Network configuration
Configuring Wireless 2.4GHz
7368 ISAM ONT
Draft Draft
September 2020
Issue 1 99
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
To Next Page
Loading...
