PCS-1 Power cable
The PCS-1 power cable (DC) is used with a docking station, a module
jig or a control unit to supply a controlled operating voltage.
PKD-1 SW security device
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-103 Rework jig for WLAN
RJ-103 is a rework jig used with rework stencil ST-36.
RJ-114 Rework jig
RJ-114 is a rework jig used with ST-41.
RJ-57 Rework jig
RJ-57 is a rework jig used with ST-22.
RM-91; RM-92
Service Tools and Service Concepts Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 4 –9
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
