15. Now remove the LCD K2.
16. Unscrew the Torx Plus® size 6 SCREWS. For assembly, tighten the screws with a torque setting of
14Ncm.
17. Remove the UI SUPPORT.
Note: When assembling the UI SUPPORT it is important to place it under the marked edge.
18. Push out the EARPIECE.
RM-91; RM-92
Disassembly/Reassembly Instructions Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 5 –9
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
