19. Unlock and remove the VGA CAMERA with the SS-51. Note the guide pin when re-assembling the CAMERA.
20. Lift up the 1MJ UI PWB ASSY with the SRT-6 carefully. Do not damage the two snaps on both sides of the
FLEX I/CONN MODULE.
21. Gently, lift the UI PWB a bit.
22. Take special care when opening the FLEX I connector.
RM-91; RM-92
Nokia Customer Care Disassembly/Reassembly Instructions
Page 5 –10 COMPANY CONFIDENTIAL Issue 1
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
