23. Place the SRT-6 exactly as shown and slide it gently along the edge of the connector.
24. Lift the other side of the connector as shown. Avoid bending the spring contacts of the BOARD TO BOARD
CONNECTOR.
25. Now, remove the UI PWB ASSY.
26. Open the UI FRAME ASSY a bit as shown. Do not separate the parts yet.
RM-91; RM-92
Disassembly/Reassembly Instructions Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 5 –11
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
