Mailbox
Define the e-mail settings
Tip: To define your mailbox settings, press ,
and select Messaging > Mailboxes.
To use e-mail, you must have a valid internet access
point (IAP) in the device and define your e-mail settings
correctly.
See "Access points", p. 179. See "E-mail
settings", p. 131.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and
internet service provider (ISP).
If you select New mailbox in the Messaging main view
and have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail settings
with the mailbox guide, select Start.
When you create a new mailbox, the name you give to
the mailbox replaces New mailbox in the Messaging
main view. You can have up to six mailboxes.
Open the mailbox
Press , and select Messaging and a mailbox.
When you open the mailbox, the device asks if you
want to connect to the mailbox (Connect to
mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection.
To view previously retrieved e-mail messages offline,
select No.
To create a new e-mail message, select New
message > E-mail in the Messaging main view or
Options > Create message > E-mail in your
mailbox.
See "Write and send messages", p. 123.
Retrieve e-mail messages
Press , and select Messaging and a mailbox.
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
1. When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail >
Messaging
127
Messaging
To Next Page
Loading...
